Factory Direct Steel Structure Factory Workshop Metal Warehouse Company Building Construction Prefabricated House

Resource integration and delivery capability:
Supply chain advantage: Relying on Shandong iron and steel industry cluster, we establish strategic cooperation with raw material suppliers and logistics enterprises to achieve rapid inventory and cost optimization, and shorten the delivery cycle by 10-15 days compared with the industry average.

EPC service capability:
Provide integrated design, procurement and construction services, equipped with a professional installation team and project management system to ensure efficient landing of complex projects.

1. Material Parameters

• Steel Grades

  • Common grades: Q235, Q345, Q390, Q420 (Chinese standards); ASTM A36, A572 (U.S. standards); S235, S355 (European standards).

  • Strength grades: Tensile strength ≥375-550 MPa, yield strength ≥235-420 MPa (varies by grade).

• Section Steel Types

  • Hot-rolled H-sections, square/rectangular tubes, circular tubes, I-beams, box columns.

  • Cold-formed thin-walled sections (for secondary components).

• Auxiliary Materials

  • High-strength bolts: Grade 8.8, 10.9 .

  • Welding materials: Electrodes/wires compatible with base metal .

  • Fireproof coatings: Intumescent (1-3 mm thickness) or cementitious (10-40 mm thickness).

2. Structural Component Parameters

• Columns (Vertical Load-Bearing Members)

  • Cross-sectional dimensions: H-sections range from H200×200×8×12 to H500×500×20×30 (mm).

  • Box columns: 400×400×16 to 800×800×30 ,wall thickness 16-40 mm.

  • Slenderness ratio control: λ ≤ 80 ,stricter for seismic design.

• Beams (Horizontal Load-Bearing Members)

  • Cross-sectional types: H-sections, I-beams .

  • Span: 6-12 m .

  • Depth-to-span ratio: 1/15-1/25 .

• Floor Systems

  • Composite deck slabs: Profiled steel sheet (0.8-1.5 mm) + concrete (100-150 mm).

  • Steel bar truss deck slabs: Span 3-6 m, suitable for large spaces.

• Bracing Systems

  • Types: Concentric braces (X/V-shaped), eccentric braces (preferred for seismic resistance).

  • Sections: Angle steel , H-sections , or circular tubes.

3. Connection Parameters

• Beam-Column Joints

  • Rigid connections: Fully welded or bolted-welded hybrid (flange welded, web bolted).

  • Hinged connections: Web bolted only.

  • Seismic joints: Follow "strong joint, weak component" principle (e.g., stiffener plates).

• Column Bases

  • Embedded base: Depth ≥1.5× column section height in concrete foundation.

  • Encased base: Encasing concrete height ≥2× column section height.

• Bolted Connections

  • Friction-type high-strength bolts: Preload-controlled .

  • Bolt spacing: ≥3× bolt diameter; edge distance ≥1.5× diameter.

4. Design Parameters

• Load Parameters

  • Seismic fortification intensity: 6-9 degrees .

  • Wind load: Basic wind pressure 0.3-0.7 kN/m² .

  • Live load: 2.0-5.0 kN/m² .

• Structural Performance Requirements

  • Inter-story drift limit: 1/250 , 1/50 .

  • Natural vibration period: Generally ≤0.1N (N = number of stories).

• Corrosion & Fire Protection

  • Anti-corrosion: Hot-dip galvanizing  or epoxy zinc-rich primer .

  • Fire resistance: 1-3 hours .

5. Fabrication & Installation Parameters

• Fabrication Tolerance

  • Component length: ±2 mm/6 m.

  • Bolt hole spacing: ±1.5 mm.

• Installation Requirements

  • Verticality deviation: ≤H/1000 and ≤25 mm (total height).

  • Weld quality: Grade I (full penetration) or Grade II (partial penetration).

6. Applications

• Building Types: Offices, hotels, apartments, commercial complexes.

• Typical Height: 6-40 stories (20-150 m).

• Economic Spans: 6-12 m (main beams), 3-6 m (secondary beams).

We offer One stop service from design, manufacture, deliver to installation and after-service.

If you have drawings, welcome to share drawings with us, quoation will be done based your drawings. Our excellent design team will design the steel structure workshop warehouse for you. If you give the following information, we will give you an satisfactory drawing.