| Brand Name: | KXD-SSW1059 |
| Model Number: | KXD-SSW1059 |
| MOQ: | 200 Square Meters (MOQ) |
| Price: | US$50.00-100.00 |
| Delivery Time: | 30days |
| Payment Terms: | T/T |
Pre-engineered steel buildings are steel structures built over a structural concept of primary members, secondary members, roof and wall sheeting connected to each other and various other building components.
These buildings can be provided with different structural and non-structural additions such as skylights, wall lights, turbo vents, ridge ventilators, louvers, roof monitors, doors & windows, trusses, mezzanine floors, fascias, canopies, crane systems, insulation and more, based on the customer's requirements. All steel buildings are custom designed to be lighter in weight and high in strength.
Pre-engineered buildings (PEBs) are the most flexible solution for contractors and owners. With the advantages of low cost, high durability, perfect quality control and fast erection, PEBs are used across a wide range of applications including factories, warehouses, logistics centers, showrooms, shopping malls, schools, hospitals and community buildings.
Price per square meter can be 25%–30% lower than conventional steel buildings. Site erection cost is low because of faster erection times and an easier erection process.
All steel components are fabricated at the factory and linked by bolts at the site. The erection process is fast, step by step, easy to install and requires simple equipment. Construction time is reduced by 60% compared with traditional R.C.C. (reinforced concrete) buildings.
Pre-engineered steel buildings are flexible in any design requirement, easy to expand in the future, and economical with low transportation costs.
Today's pre-engineered buildings are the green solution for the environment, offering CO2 reduction, energy efficiency and recyclability.
A pre-engineered metal building consists of the following components:
Primary members are the main load-carrying and support members of a pre-engineered building. The main frame members include columns, rafters and other supporting members. The shape and size of these members vary based on the application and requirements.
Secondary structural framing refers to purlins, girts, eave struts, wind bracing, flange bracing, base angles, clips and other miscellaneous structural parts. Purlins, girts and eave struts are cold-formed steel members with a minimum yield strength of 345 MPa (50,000 psi) and conform to the physical specifications of GB/ISO/CE or equivalent.
Standard steel panels are 0.3 mm, 0.4 mm, 0.5 mm or 0.6 mm thick and have a minimum yield strength of 345 MPa. Steel panels are hot-dipped and galvanized with zinc or zinc-aluminium coating. The base material is pretreated before applying a corrosion-resistant primer and top coat. The combined thickness of the painted film is 25 microns on the front side and 12 microns on the reverse side.
Other building accessories include anchor bolts, fasteners (bolts, nuts, turnbuckles, expansion bolts), gutters, downspouts, doors, windows, ventilators, skylight panels, louvers and all other building-related materials.
The purpose of this method statement is to describe the guidelines and methodology followed by our company during the fabrication, blasting, painting and supply of pre-engineered structures for any steel building project.
The Design and Development department prepares the structural drawings for the project. As per the drawings, the production department prepares the items. Preparation is divided into two stages.
Once cleaned, the material is fed into the chamber of the automated machine through the conveyor. The chamber consists of both inlet and outlet vestibules, on which rubber curtains are hung to prevent the escape of abrasives during the blasting process.
Application of paint is normally done once per day in the afternoon, once the day's scheduled blasting work is complete. Prior to the application of the primer, QC inspects the blasted surfaces to check that the required standards in the approved ITP have been met. Any area deemed to have fallen short of the required standard requires re-blasting, either by being driven through the blast chamber again or by injection blast gun if possible, while still on the out-feed rack. Any "sweep" blast done by mini pot utilizes copper slag as the abrasive.
Once the blasted surface has been accepted by QC, application of the primer can commence, provided ambient condition checks prove satisfactory. These must be checked and recorded before any and every application. For coatings to proceed, the surface must be at least 3°C above the dew point temperature, and the relative humidity must be 85% or below. The surface must be dry and free from oil, grease and soluble salts, protrusions, sharp edges or visible laminations, and must not exceed 40°C in temperature.
Before application, QC inspects the atmospheric conditions according to GB50205-2001:
Paint is applied wherever possible by means of airless spray. The paint material is checked for conformity with shelf-life restrictions, temperature and batch number. Mixing ratio, tip size and method of agitation are checked by QC to ensure adherence with the approved ITP and paint manufacturer's recommendations. Pot life is also monitored once mixed. Only experienced spray applicators are used for the application of paint materials, and all wear appropriate PPE for the job.
During application, the spray applicator takes WFT (Wet Film Thickness) readings in accordance with the approved ITP to ensure the target WFT is being achieved. Spot checks by QC verify conformity.
Specification of Painting System:
Primer coat: per the project requirement
Second coat: per the project requirement
Third coat: per the project requirement
Touch-up at site: after erection
With a 20-year warranty in the steel building industry, our company sets a high standard for the quality of steel buildings. We have acquired the ISO9001 and CE certificates. The following are the related standards that we strictly follow for the design and fabrication of steel buildings:
To ensure the quality of fillet welds, meet the technical requirements of welded members and improve the standardization of our fabrication, this regulation has been specially formulated.
This manual applies to the design, fabrication and inspection of fillet weld size.
3.1 Definition of fillet weld leg size (K): The length of the catheti from the maximum isosceles triangle drawn from the section of the fillet welding seam. For the fillet weld leg size without groove, see Illustration 1; for the fillet weld leg size with PJP or CJP groove, see Illustration 2 (take CJP for example).
3.2 Fillet weld leg size requirements:
Based on the standard, our experience and actual process, the requirements on fillet weld size are as follows (in terms of when there is no request on the drawing but there is an inspection request):
| Form of Fillet Weld Leg | K (Fillet Weld Size) Value | Note |
|---|---|---|
| Fillet weld without groove | K = (0.7~1)t and ≤ 15 mm | For most steel structure buildings |
| Fillet weld without groove | K = (0.5~0.6)t | For strengthening ribs and other secondary members |
| Fillet weld with groove (CJP and PJP) | K = t/4 and K ≤ 10 mm | For most steel structure buildings |
| Fillet weld with groove (CJP and PJP) | K = t/2 and K ≤ 10 mm | Important members (crane beams or connection between web plates and flange plates of similar members) |
Note: 1) t = thinner weld member thickness. 2) For concave fillet welds, the actual measured value is required to be 1–3 mm higher than the fillet weld foot size specified in the above table (because what is actually measured is not the fillet weld size; it is larger than the fillet weld size). 3) If the fillet weld size is specifically marked on the drawing or technical document, we will strictly follow it.
For secondary members that are free of force and only serve for strengthening, the fillet weld size may refer to the following chart:
| Parent Metal Thickness (t) (mm) | Minimum Fillet Weld Size (mm) |
|---|---|
| t ≤ 6 | 3 (minimum value being 5 for crane beams) |
| 6 | 5 |
| 12 | 6 |
| t > 20 | 8 |
Process flow: Steel plate cutting → H-section assembly → Automatic welding → H-section strengthening → Assembly → Manual welding → Shot blasting → Painting → Storage.
The H-section steel plate is checked again by the factory and applied only under the condition of meeting design and specified requirements after checking. Steel plate cutting should aim at quality guarantee and material saving. For each process — plate cutting, H-type assembly, component assembly and pre-assembly — precise setting-out is carried out by professional setting-out workers on the processing surface and assembly sample plates. To guarantee the accuracy of the components' geometrical dimensions, tolerance of form and position, angle and contact surface, inspection by an inspector after setting-out is necessary. To ensure cutting quality, the surface of ultra-thick plates is subjected to a surface carburizing hardness test before cutting. CNC cutting equipment is preferred for cutting. High-purity 98.0% acrylic gas and 99.99% liquid oxygen gas are used to guarantee the smoothness and flatness of the cutting surface without notches and slag. The groove is cut by a special imported cutting machine.
| Equipment Name | Model No. | Application Feature |
|---|---|---|
| Portable CNC Fire-cutting Machine | CNCDG-1530 | Steel plate cutting (5–100 mm plate cutting thickness), beveling of the edge. Advantageous as small equipment and easy to move. Mainly for cutting regular and irregular small components and beveling of the plate. |
| Straight Flame Cutting Machine | DZCG-4000A | Steel plate cutting (5–100 mm plate cutting thickness), Y flange plate and web plate cutting; effective cutting width: 3200 mm. |
| CNC Cutting Machine | CNC-4000C | Steel plate cutting (5–100 mm plate cutting thickness), Y flange plate, web plate and irregular component cutting; effective cutting width: 3200 mm. |
| Radial Drilling Machine | Z3050*16/1 | Maximum drilling diameter φ50 mm; mainly for processing of component bolt-connection holes. |
| Puncher Machine | JH21-400 | Maximum stamping pressure 400 ton; mainly for plate punching, blanking, bending and shallow stretching. |
| Shearing Machine | Q11Y-25*2500 | Cutting width 2500 mm and cutting thickness 3–25 mm. |
The assembly process is set up on the imported H-section production line. A 4-hydraulic positioning system presses firmly between the upper/lower flange and web plates in position. The parallelism of the flange plates and perpendicularity between flange and web plates are adjusted and then fixed. The fixing welding adopts CO2 gas shielded welding.
| Equipment Name | Model No. | Application Feature |
|---|---|---|
| H-Section Steel Assembly Machine | Z20B | Mainly for H-type assembly; flange width 150–800 mm, web height 160–2000 mm. |
The H-section steel members are hoisted into the gantry-type submerged arc automatic welding machine for welding. The welding process is carried out in accordance with the specified welding sequence and regulation parameters. Preheating, using electrical heaters, is necessary for ultra-thick plates of components. The set temperature is determined based on the specified value. Please see factory welding process documents for details.
| Equipment Name | Model No. | Application Feature |
|---|---|---|
| Gantry-type Submerged Arc Automatic Welding Machine | LHA5ZB | Mainly for assembly welding of H-section steel whose maximum cross section is up to 800 mm × 2000 mm. |
H-section steel strengthening process: correction of flange flatness using the H-section steel flange plate strengthening machine. Flame-correct the perpendicularity between the H-section flange and web plate under special circumstances, then correct the side bending of the H-section steel. The flame temperature should be controlled within the range of 600–800°C.